Amrfeo Private Limited

Easy-Bore™: PHPA gel polymer for bentonite drilling mud

A partially hydrolysed polyacrylamide gel that thickens bentonite slurry, coats reactive clay and shale, and cuts skin friction in microtunnelling. For fresh water.

Easy-Bore™ gel in 25 kg pails

Description

Easy-Bore™ is a PHPA polymer supplied as a gel, so it dissolves fast in bentonite slurry with no fish-eyes. It thickens the slurry, coats reactive clay and shale cuttings, prevents bit balling and reduces drill torque. It works with most drilling fluid products.

Used for: Microtunnelling · HDD · Piling · Diaphragm walls · Stiff foam drilling

Other polymers, additives and foam: AM-PAC™ · Foam-Drill™

All Amrfeo products

What goes wrong on site

What you see on site

What this does about it

Reactive clay balls on the bit and the torque climbs.
Easy-Bore™ encapsulates the cuttings, prevents bit balling and reduces drill torque.
The slurry needs more viscosity than the bentonite gives.
The gel extends the bentonite and lifts the slurry's Marsh viscosity.
Jacking force and skin friction rise on a microtunnel drive.
It reduces skin friction, jacking force and overall tunnel pressure.
Powder polymer leaves fish-eyes in the mud.
As a gel it dissolves fast in bentonite slurry, with no fish-eyes.

Technical properties

  • 40Fann 600 rpm, gel alone in fresh water at 25 kg/m³
  • 60–70%Degree of hydrolysis
  • 17–20%Solid content
  • 8–9pH, 3% solution
  • 1.03–1.05Specific gravity

Rheology of the gel alone in fresh water at 25 kg per m³: its Fann VDR reading at 600 rpm, a test concentration, not a slurry dose. The other figures describe the gel as supplied.

Packing 25 kg pails.

Resources

  • Technical data sheetSent to you by email.
    Request
  • Safety data sheetSent to you by email.
    Request

Not sure what your fluid needs?

Send us the drilling fluid details: the bentonite in use, the ground and the water. The technical desk reads them and replies within 1 working day.

Made by us. Checked by others.

Since 1994

A manufacturer, not a trader. Bentonite at Bhuj, polymers at Domjur.

ISO 9001:2015

All our plants are quality management system certified.

Star Export House

Recognised by the Government of India. We ship through Mundra and Kandla.

Own plant, Domjur

The polymers, cellulose and foam are made at our own plant at Domjur, Howrah.

Frequently Asked Questions

What is Easy-Bore™?

PHPA (partially hydrolysed polyacrylamide), supplied as a gel. It thickens a bentonite slurry, protects against shale, and cuts skin friction in microtunnelling. With Foam-Drill™ it makes a stiff foam, in fresh water.

What does it do to a bentonite slurry?

It thickens it, while the fluid loss stays the same. How much to add depends on your bentonite, ground and water: send us your mud programme.

Can it be used in salt or hard water?

No. Use it in fresh water only, treated with soda ash light; it is not designed for chloride or hard water of any kind. For saline systems, AM-PAC™ is effective in saline water, and Foam-Drill™ works with all types of make-up water, including hard, brackish and seawater.

How does it help in reactive clay and shale?

It coats the hole wall and the cuttings, which stops shale swelling and breaking down, prevents bit balling and reduces drill torque. In our own test, a reactive clay ball broke down in fresh water within 15 minutes but stayed whole in an Easy-Bore™ and Foam-Drill™ mix.

Why a gel rather than powder PHPA?

Powder PHPA forms fish-eyes when it is mixed straight into a bentonite slurry. Easy-Bore™ is made and supplied as a gel, so it dissolves fast in the slurry, with no fish-eyes.

How is Easy-Bore™ supplied?

As a viscous gel in 25 kg pails, made at our polymer plant at Domjur, Howrah. For pricing, lead time and shipping to your port, ask for a quotation.

Which test methods and standards apply?

The data sheet names test methods, not a product standard: viscosity and fluid loss, measured in a Pileman® slurry, and pH on a 3% solution of the gel.

Who supplies Easy-Bore™ PHPA?

Amrfeo Private Limited, a manufacturer since 1994, makes and exports Easy-Bore™, a PHPA gel, supplying buyers across the Gulf, Europe and Asia. It is made at our plant at Domjur, Howrah, West Bengal, under ISO 9001:2015.

Last updated:

Get an Easy-Bore™ quote

Add your name

Add an email address

Check the phone number

Reply within 1 working day · Privacy policy
Sent. We reply within 1 working day.

Quote now

Add your name

Add an email address

Add your drilling fluid details (optional)

Reply within 1 working day · Privacy policy

Sent. We reply within 1 working day.
Scroll to Top