Since 1994
A manufacturer, not a trader. Bentonite at Bhuj, polymers at Domjur.
A water-soluble blend of anionic surfactants that makes a stable foam to lift cuttings and cool the bit, in fresh, brackish or seawater.

Foam-Drill™ is a safe, water-soluble, proprietary blend of anionic surfactants. It makes a stable foam at low concentration that carries the cuttings, cools and lubricates the bit, improves hole cleaning and the rate of penetration, and keeps the dust down. It works with all types of make-up water, including hard, brackish and seawater. It is environment friendly, biodegradable and safe for use in potable water wells.
Used for: Air, water-well, rock and mining drilling · Tunnelling with EPB machines
Other polymers, additives and foam: Easy-Bore™ · AM-PAC™
What you see on site
What this does about it
Typical dose per m³ under normal drilling conditions in fresh water; the drilling system, depth and equipment change it. pH (1% solution) and specific gravity describe the liquid as supplied.
Packing 210-litre barrels.
Send us the drilling fluid details: the bentonite in use, the ground and the water. The technical desk reads them and replies within 1 working day.
Since 1994
A manufacturer, not a trader. Bentonite at Bhuj, polymers at Domjur.
ISO 9001:2015
All our plants are quality management system certified.
Star Export House
Recognised by the Government of India. We ship through Mundra and Kandla.
Own plant, Domjur
The polymers, cellulose and foam are made at our own plant at Domjur, Howrah.
Air drilling of many kinds, reverse circulation, rock drilling, water-well drilling and mining, and face support in EPB tunnel boring machines. The foam carries the cuttings, cools and lubricates the bit, and keeps the dust down.
Typically 10 kg per m³ under normal drilling conditions in fresh water. With severe water influx, raise the foam concentration and lower the injection rate. The right figure also depends on the drilling system, the depth and the equipment.
Yes. It works with all types of make-up water, including hard, brackish and seawater. For very hard water, pre-treat with soda ash.
Yes. It drills through sticky clay and prevents bit balling. For extremely sticky clay and shale, a stiff foam can be made by adding AM-PAC™ or Easy-Bore™ gel; which one depends on your make-up water, so ask us. In our own test, a reactive clay ball stayed whole in an Easy-Bore™ and Foam-Drill™ mix.
Yes. It is very effective for drilling in lost-circulation areas, where a drilling mud would be lost to the ground.
It is safe for use in potable water wells. Handle and dispose of any drilling fluid under your local rules and the site's environmental plan; the safety data sheet has the detail.
Its foam is tested to ASTM D1173, in water from fresh up to seawater pre-treated with soda ash. The data sheet names no other standard.
Amrfeo Private Limited, a manufacturer since 1994, makes and exports Foam-Drill™ drilling foam, supplying buyers across the Gulf, Europe and Asia. It is made at our plant at Domjur, Howrah, West Bengal, under ISO 9001:2015.
Last updated: