Since 1994
A manufacturer, not a trader. Bentonite at Bhuj, polymers at Domjur.
A selectively mined clay binder that gives green sand better wet tensile and green compressive strength, and holds that strength through the heat.

Varan® is sodium-activated bentonite for green sand moulding, selectively mined for foundry use and made entirely by clay extrusion, a mechanical process that gives uniform behaviour. It takes up water quickly, so preparation time is short, and it improves shakeout. In the system sand it reduces the dead clay percentage and the moisture needed to achieve the moulding properties, and on long-term use less Varan® is consumed.
Used for: Foundry green sand moulding
Other bentonite for process industries: Pellet-Maker™
What you see on site
What this does about it
At 5% bentonite addition on AFS 50–60 sand, average values. Green compressive strength is also given after calcining to 550 °C: the bond the sand keeps after the heat.
Packing 25 kg bags, stretch-wrapped on wooden pallets, or 1,300 kg jumbo bags.
Send us your sand test report — grain fineness, active clay, compactability, moisture. The technical desk reads it and replies within 1 working day.
Since 1994
A manufacturer, not a trader. Bentonite at Bhuj, polymers at Domjur.
ISO 9001:2015
All our plants are quality management system certified.
Star Export House
Recognised by the Government of India. We ship through Mundra and Kandla.
Own mine, Kutch
The clay in every bag comes from our own reserves in Kutch.
Green sand moulding in iron and steel foundries. It is sodium-activated bentonite, selectively mined for foundry use and made from a 100% clay extrusion process. It takes up water quickly, so preparation time is short.
Varan® is specified at 5% bentonite addition with the sand at AFS 50–60. What your own system takes depends on your sand, your castings and your moulding method: finer sand, heavier sections and hotter pours need more. Send us a sand test report and the technical desk will reply.
Yes. Varan® keeps its strength when exposed to high temperature, which is what green sand needs for a better shakeout.
Probably because the clay you track is total clay, not active clay. Every pour burns some bentonite into dead clay, which stays as inert fines, so adding more bentonite without removing fines makes the sand heavier and weaker. Regular use of Varan® reduces the dead clay percentage, and less moisture is needed to achieve the moulding properties.
Compare it on cost per tonne of good castings, not on the price of a bag. On long-term use, consumption of Varan® is considerably reduced; less moisture is needed; and casting blow holes reduce considerably, owing to the reduction of dead clay. Send us a sand test report and we will work it out for your system.
25 kg bags on wooden pallets, or 1,300 kg jumbo bags: a container takes 26.4 tonnes net in 25 kg bags and 26 tonnes net in jumbo bags. It is mined and processed by us at Bhuj, Kutch, Gujarat, and exported through Mundra and Kandla.
Free swelling is tested to ASTM D5890, and strength and MBA value by the VDG standard, including VDG P69 after heating.
Last updated: